Get perfectly level, professional-looking tiles every time β reduce lippage, speed up installation, and achieve consistent 2mm joints across the floor or wall.
Uneven tiles (lippage) waste time and ruin the finish. Our 2mm leveling system helps keep tile edges aligned while adhesive sets, so your job looks clean and professional.
Place the clip, insert the wedge, then remove after the adhesive sets.
Slide the clip base under the tile edges to create a consistent 2mm joint.
Push the wedge through the clip and tighten to level adjacent tiles.
Once cured, tap from the side to break off the clip cleanly. Use a rubber mallet.
2mm joints are widely used for modern installations, especially with porcelain and rectified tiles, giving a neat and consistent finish.
Same tiles, same installer β the difference is alignment and consistency.
Pick a pack size that matches your project. Bulk savings available.
Try it risk-free. Not satisfied? Return unused packs within 30 days for a full refund.
Quick answers to common questions.
Yes. Itβs commonly used with porcelain and ceramic tiles. Check your tile thickness compatibility in the product details.
For best results, tightening pliers help speed up work, but wedges can also be inserted by hand on smaller jobs.
Clips are designed to break off after the adhesive sets. Wedges are typically reusable.
Tap from the side in the direction of the joint line. A rubber mallet makes removal easier and cleaner.
It depends on tile size. As a rough guide, larger tiles use fewer per mΒ². Add a simple calculator later for higher conversion.